Johannus LiVE III AGO, User Manual

Page: 33 / 52

User Manual LiVE III AGO 34
4. Press the ENTER-piston. A list with available Organ Settings appears on the
display.
5. Use the - and + pistons to select the
Key Volumes
function on the display.
6. Press the ENTER-piston. The sub-functions of the Key Volumes menu appear
on the display.
7. Use the - and + pistons to select the
Reset one stop
sub-function on the
display.
8. Press the ENTER-piston. A question to select a stop to reset appears on the
display.
9. Activate one stop. A question to confirm appears on the display.
10. Use the - and + pistons to select
No
or
Yes
.
11. Press the ENTER-piston to confirm and to return to the Key Volumes menu.
12. Press the MENU pistons three times to exit the Johannus Menu.
c. Reset ALL stops
The Reset ALL stops function resets the key volumes of all stops to the factory
setting.
1.
Press the MENU-piston.
2. Use the - and + pistons to select the
Organ Settings
function on the
display.
3. Press the ENTER-piston. A list with available Organ Settings appears on the
display.
4. Use the - and + pistons to select the
Key Volumes
function on the
display.
5. Press the ENTER-piston. The sub-functions of the Key Volumes menu appear
on the display.
6. Use the - and + pistons to select the
Reset ALL stops
sub-function on
the display.
7. Press the ENTER-piston. A question to confirm appears on the display.
8. Use the - and + pistons to select
No
or
Yes
.
9. Press the ENTER-piston to confirm and to return to the Key Volumes menu.
10. Press the MENU-piston three times to exit the Johannus Menu.
5.5.6 MIDI Config
MIDI is a protocol for communication between the organ and other devices, such
as PC, Johannus MIDI Se or other musical instruments.
The programmable MIDI stops allow you to control any module voice through any
MIDI channel (1-16).
The four parts of the programmable MIDI code are: Channel, MSB, LSB and Voice.
1.
Press the MENU-piston.
2. Use the - and + pistons to select the
Organ Settings
function on the
display.
3. Press the ENTER-piston. A list with available Organ Settings appears on the
display.
4. Use the - and + pistons to select the
MIDI Config
function on the
display.
5. Press the ENTER-piston. A question to select a MIDI stop to configure appears
on the display.