Johannus LiVE III AGO, User Manual

Page: 35 / 52

User Manual LiVE III AGO 36
5.5.8 Sample Set Version
The Sample Set Version function shows the date of
the sample set of the activated organ bank.
1. Press the MENU piston.
2. Use the - and + pistons to select the
Organ
Settings
function on the display.
3. Press the ENTER-piston. A list with available
Organ Settings appears on the display.
4. Use the - and + pistons to select the
Sample Set Version
function on
the display.
5. Press the ENTER-piston. The data of the sample set that is currently loaded in
the organ appears on the display.
6. Press the MENU piston three times to exit the Johannus Menu.
System Settings
With the System Settings menu you can change the settings for the entire LiVE III
organ. The System Settings menu consists of the following sub-functions:

Default Ambiance § 5.6.1

Default Organ § 5.6.2

Headphones / Aux Out § 5.6.3

Keyboard Mode § 5.6.4

Reset § 5.6.5

Rear Speaker level § 5.6.6

Side Speakers Level § 5.6.7

Stop Numbers § 5.6.8

Tone Control § 5.6.9

Version § 5.6.10
5.6.1 Default Ambiance
The System Setting Default Ambiance determines which listening position is
selected at the startup of the organ.
1. Press the MENU-piston
2. Use the – and + pistons to select the
System Settings
function on the
display.
3. Press the ENTER-piston. A list with available System Settings appears on the
display.
4. Use the – and + pistons to select the
Default Ambiance
setting.
5. Press the ENTER-piston. A list with available listening positions appears on the
display with a pointer for the selected listening position.
6. Use the – and + pistons to select the desired listening position.
7. Press the ENTER-piston to confirm and to return to the System Settings menu.
8. Press the MENU-piston twice to exit the Johannus Menu.
Sample Set Version:
Utrecht, Bätz
Version 1.0
Use ENTER or MENU