Johannus LiVE III AGO, User Manual

Page: 29 / 52

User Manual LiVE III AGO 30
7. Change the registration and press the ENTER-piston to save the new
registration in the memory of the organ.
8. Repeat steps 6 and 7 if more crescendo pedal steps has to be changed.
9. Press the MENU piston three times to exit the Johannus Menu.
5.5.2 Datadump
The Datadump function saves several settings from the organ to an USB stick. This
requires a USB stick, with a size of up to 32 GB and pre-formatted with the FAT32
file system.
The settings that are saved are: the contents of all capture memory locations and
all settings that can be set via the Johannus Menu, except Key Volumes.
Key Volume settings are a part of the intonation data and can be received with
the optional Johannus Intonat 7 software.
a. Saving data from the organ
1.
Press the MENU-piston.
2. Use the - and + pistons to select the
Organ Settings
function on the
display.
3. Press the ENTER-piston. A list with available Organ Settings appears on the
display.
4. Use the - and + pistons to select the
Datadump
function on the display.
5. Press the ENTER-piston. The Datadump menu appears on the display.
6. Use the - and + pistons to select the
Save datadump
function.
7. Make sure the desired USB stick, up to a maximum storage size of 32 GB, is
correctly connected and is pre-formatted with the FAT32 file system.
8. Press the ENTER-piston. When data is being sent,
Busy...
appears on the
display.
9. If the data dump is complete, the Datadump menu appears on the display.
10. Press the MENU-piston three times to exit the Johannus Menu.
b. Uploading data to the organ
1. Follow the steps 1 to 5 as described above at a. Saving data from the organ.
2. Use the - and + pistons to select the
Load datadump
function.
3. Make sure the desired USB-stick is inserted properly.
Do not use the organ when the
Busy...
text is on the display.
Make sure to upload only data files which are created with the same
instrument. Uploading a data file from another instrument may jeopardize
the functioning of your instrument.
It is possible that there is already a file present. You will be asked whether
the file should be overwritten. Use the - and + pistons to select the
function, then press the ENTER-piston to confirm.