background image

 

 

User Manual American Classic 770 

11 

 

It is advisable not to use the Manual Bass while playing the pedal board to avoid 
double bass tones. 

4.7

 

Accessories 

Antiphonals 

On an instrument with separate divisions (each division having its loudspeakers) 
one or more divisions may be connected to a second speaker set. The division 
concerned can be switched from the main speaker set to e.g. a speakerset behind 
the choir, by means of the switch Choir Antiphonal or Solo/Eth. Antiphonal. 

 
CAN: Cancel 

Cancel is a function to switch off all stops at once. 
 

Cantus Firmus (melody coupler)

 

Cantus firmus: Latin for ‘fixed voice’ or in organs ‘solo voice’ or ‘melody coupler’.

 

Couples the Swell monophonic to the Great. Only the highest key that is played on 
the Great is coupled from the Swell to the Great. 
With use of a solo registration on the Swell in this way a solo is heard while 
playing only on the Great. 
If only the highest key of a chord is released, the key activated by melody coupler 
is dropped until a new highest key is played.  
Use the stop switches to activate the melody coupler on swell or melody coupler 
on choir by  
 

 

 

CH: Chorus 

Chorus is a function for lightly detuning the organ stops to give it a broader and 
livelier sound. 

 
Fix Accessories 

When the couplers and the tremulants are used in the fixed (preset) combinations 
or free (capture) combinations or when the 0-piston or CAN piston is used, the 
couplers and tremulants will change with it. This can be prevented by pressing the 
Fix Accessories stop switch. As long as this tab is switched on, the couplers and 
tremulants can only be switched on or off manually 

 
KT: Keyboard Transfer 

Keyboard Transfer is a function to switch the manuals of the Choir and the Great. 
When Keyboard Transfer is active manual 1 is the Great manual and manual 2 is 
the Choir manual. Keyboard Transfer also switches the divisional pistons of the 
relevant manuals. 
 

MB: Manual Bass (bass coupler) 

Couples the Pedal monophonic to the Great. Only the lowest key that is played on 
the Great is coupled from the Pedal to the Great. 
If only the lowest key of a chord is released, the pedal key activated by the 
Manual Bass function is dropped until a new lowest key is played.  
Activate the Manual Bass with the MB piston. 
 

 

 

It is advisable not to use the Cantus Firmus in combination with the coupler 
SWELL - GREAT because this overrules the solo function of the Cantus Firmus. 

Summary of Contents for American Classic 770

































Reviews: