background image

Oxford

®

Low Profile Weigh Scale

9

English

7. Technical Specifications

•  Electronics ..................Microprocessor controlled.

•  Power .........................9 volt alkaline battery PP3.

•  Battery Life .................Exceeds 70 hours continuous operation.

•  Display ........................LCD (liquid crystal display) 63 x 18mm Characters 15mm high.

•  Weighing Units ...........Kilograms (kgs) or (lbs and kgs - North America only).

•  Load Cell ....................Rated at 350 kgs.

•  Case ...........................ABS

Weights:

• 

Oxford Low Profile Weigh Scale

 ....................................................... 1.1 kgs

• 

Oxford Low Profile Weigh Scale fitted to 6 Point Spreader Bar

 ....... 2.2 kgs

• 

Oxford Low Profile Weigh Scale fitted to 4 Point Cradle

 .................. 7.0 kgs

• 

Oxford Low Profile Weigh Scale fitted to the APC

 ............................ 9.5 kgs

WARNING

Do not exceed the capacity of the lift. Use above this capacity is unsafe and may result in 
serious injury or death.

CAUTION:

 The digital weigh scale is to be used in a clean, dry, temperature controlled indoor 

environment.

Summary of Contents for Oxford OXF-UNISCALE100

















Reviews: