Oxford
®
Low Profile Weigh Scale
5
English
3. Assembly
Your weigh scale comes fully integrated with the 6 point (loop) spreader bar, 4-point (non-
powered) cradle or a 4-point adaptive power cradle (powered) cradle.
Attaching the scale/cradle assembly to the lift is quick and easy and will require a small blade
screwdriver.
You need to first remove your existing spreader bar or cradle from the lift.
Removal of the spreader bar/cradle:
To attach your new Oxford digital scale you may first need to remove the spreader bar/cradle from
the lift by removing the quick-release pin that retains the 4-point cradle or 6-point spreader bar
(Fig. 2). A small flat blade screw driver is the only tool required.
Caution:
Prior to removing the quick release pin, the cradle needs to be supported by a stationary
object such as a work bench or table. This will prevent the cradle from dropping suddenly
preventing an injury or damage to the cradle.
Fig. 2
