Hoyer
®
HPL700 and HPL 700WSC
6
English
3. Assembly and Commissioning Instructions
WARNING
The Hoyer
®
HPL700 is heavy and will need to be lifted with care. You may need assistance
to lift the Hoyer HPL700 from the carton.
Carton Contents
Place the carton in a clear working area and open carefully. The carton contains:
Hoyer HPL700 Lift
Product documents
Hand control
Battery pack (2)
Charging cord
Desk top charger/stand
Covers and hardware (2)
6-point spreader bar
Assembly Instructions
Remove all the parts from the carton and place on the floor, taking care to protect the finish from
damage.
1.
Place the chassis in a clear space and apply the rear brakes (Figure 1).
2.
Remove the 5/8" bolt that connects the mast (in its shipping position) to the base. Remove the
3/8" carriage bolt as well (Figure 2). Do not discard these nuts and bolts as they are needed for
assembly.
Figure 1
Figure 2
