Hoyer
®
HPL700 and HPL 700WSC
18
English
Once aligned in the boom slot reinsert the quick release pin fully into the sleeve until it locks into
position (Figure 11). YOU MUST CHECK THAT THE PIN IS SECURELY FITTED.
To do this, press your finger into the barbed end. If the pin remains stationary, the lift is safe to use.
HPL700WSC (with scale):
Place a plastic washer on each side of scale housing, align holes, align these items within the end
of the boom, and install the pin sleeve. Insert the quick release pin fully into the sleeve until it locks
into position (Figure 10 and 11). You must check that the pin is securely fitted.
Removal
CAUTION
Be sure to support the weight of the spreader bar before removing pin.
To detach pin, depress the spring barb (using a flat screwdriver or similar) and pull the pin out.
Support the 6-point spreader bar, and then pull the pin sleeve in the opposite direction, removing it
completely from the boom. This will release the spreader bar completely.
Figure 10
Figure 11
