6
3. UNPACKING & CHECKING
Carefully remove the tool from the packaging and examine it for any sign of
damage that may have happened during shipping. Lay the contents out and
check them . If any part is damaged or missing; please contact the seller and do
not attempt to use the power tool.
If any of the packaging is to be thrown away, make sure they are disposed of
correctly; according to local regulations.
Accessories:
3pcs solder iron tips
2pcs 10g Solder of dia.1mm and 1.5mm
1pc sponge
4. OPERATION INSTRUCTIONS
Intended use
This soldering station is used to create soldered connections with soft-soldering
in electrics and electronics.
The appliance is designed for soldering for private use.
This product is not intended for commercial use.Generally acknowledged
accident prevention regulations and enclosed safety instructions must be
observed.
Only perform work described in these instructions for use.Any other use is
improper.The manufacturer will not assume responsibility for damage resulting
from such use.
Mounting/changing the soldering tip
WARNING!
Risk of injury! Allow the soldering station to cool down completely
before changing the tip.
CAUTION!
Risk of injury! Some tips are very sharp.Always wear gloves and/or
use pliers when changing tips.
The pointed soldering tip is particularly suitable for point soldering and thin
cables.The flat soldering tip is particularly suitable for light electrical work.
Proceed as follows to change the soldering tip:
- Unscrew the existing tip to remove it from the tip
