3
you are not in a condition to use it safely.
● This product is not intended to be used by per-sons (including children) or who
are limited in their physical, sensory or mental capacities or who lack experience
and/or knowledge of the product unless they are supervised, or have been
instructed on how to use the product, by a person responsible for their safety.
● Ensure that children are not able to play with the device.
● Always comply with all applicable domestic and international safety, health, and
working regulations.
Electrical safety
● The device may only be connected to a socket that is correctly installed and
grounded.
● The fuse must be a residual current circuit-breaker with a measured residual
current of no more than 30 mA.
● Make sure that the power supply corresponds with the connection
specifications of the device before it is connected.
● The tool may only be used within the specified limitations for voltage and
power .
● Do not touch the mains plug with wet hands!Always pull out the mains plug at
the plug and not by the cable.
● Do not bend, crush, pull or drive over the power cable, protect from sharp
edges, oil and heat.
● Do not lift the device using the cable or use the cable for purposes other than
intended.
● Check the plug and cable before each use.
● If the power cable is damaged immediately disconnect the plug. Never use the
device if the power cable is damaged.
● If the device is not in use make sure the plug is pulled out.
● Make sure that the device is switched off before plugging in the mains cable.
● Make sure that the device is switched off before unplugging it.
● Disconnect the power supply before transporting the device.
Device-specific safety instructions
● Soldering irons generate a considerable amount of heat. Please ensure that
