Jobsite CT5559, Original Instruction

Page: 3 / 16

2
1. SPECIFICATION
Rated Voltage:230V~
Rated frequency: 50Hz
Rated input power: 380W
Rated no load speed: 1800/min
Protect class:II
Degree of protection: IP20
Noise emmission: Lp=86.7dB(A), Lw=97.7dB(A)
Cutting Capacity:
Sheet Steel: 0. 5mm ~ 1. 8mm
Stainless Steel: 0.5- 1. 2mm
2. GENERAL SAFETY INFORMATIONS
WARNING!
Failure to follow all instructions listed below & overleaf may result in electric
shock, fire or serious injury.
1 ) Work area
a) Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust. Power tools create sparks which may ignite
the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
2 ) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body
is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
3 ) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating