Jobsite CT5559, Original Instruction

Page: 6 / 16

5
accessory.
i) Never lay the power tool down until the accessory has come to a complete stop.
The spinning accessory may grab the surface and pull the power tool out of your
control.
j) Do not run the power tool while carrying it at your side. Accidental contact with
the spinning accessory could snag your clothing, pulling the accessory into your
body.
k) Regularly clean the power tool's air vents. The motor's fan will draw the dust
inside the housing and excessive accumulation of powdered metal may cause
electrical hazards.
l) Do not operate the power tool near flammable materials. Sparks could ignite
these
m) Do not use accessories that require liquid coolants. Using water or other
liquid coolants may result in electrocution or shock.
3. TECHNICAL DESCRIPTION
1. Gear Housing
2. Switch
3. Cutting Blade Guide
4. Screw Sleeve