Folding and Unfolding the Frame
1.
Stand at the left side of the bike
2.
Release central frame hinge. Pull silver arm forward and from bike direction and next pull it up.
3.
Continue to fold until both sides of the frame are next to each other, turning the front wheel slightly left to facilitate folding if needed.
4.
Reverse the steps to unfold the frame and securely lock the central frame hinge.
NOTICE:
Use caution to keep fingers, clothing, etcetera away from the folding parts and potential pinch points. Always check the frame folding mechanism latch and
handlebar folding mechanism latch are locked before moving or riding the bike.
Before each ride, visually inspect the frame for proper alignment and ensure all hardware is properly secured.
Folding Handlebar Stem Operation
Securing the Handlebar Stem in the Unfolded (Ready to Ride) Position:
1.
Align the handlebar
so it is upright and the hinge is closed, using caution to keep fingers, clothes, or anything else away from the clasp.
2.
Fold the stem clasp release lever up
and press towards the stem until the release lever clicks into place. When properly secured, the stem clasp should not move.
Folding the Handlebar Stem for Storage:
1.
Push the stem clasp release lever
from stem direction.
2.
Fold the handlebar stem to the side,
hinging away from the clasp.
Battery Charging
The battery can be charged both located inside or when you take it out of the frame.
1.
When is located inside frame:
a.
Turn e-bike power off.
b.
Locate charging port - right side of battery and remove rubber cover.
c.
Plug the charger into the battery's charging port first next connect to the power outlet (HC-36V15.6Ah)
2.
When battery is outside e-bike:
b.
Place battery in secure place and plug the charger into the battery's charging port first next connect to the power outle. (HC-36V15.6Ah).
Unplug the charger from the outlet, then the charging port. If battery is charged outside the bike put back intside, lock in frame by key and unfold frame.
15
