19
Allvis – Manual (EN 2021-05-25)
Important!
(AFTER CALIBRATION HAS BEEN COMPLETED)
•
If the calibration point is BEHIND the magnetic
attachment in relation to the points to be measured,
the level MUST be turned 180 degrees/ one half turn,
before measuring can begin.
•
If the calibration point is in the SAME direction as the
points to be measured, the level should NOT be
turned.
When the vehicle is not placed horizontally level (from side to
side) measurement values can be affected, although in most
cases only marginally (see 4.6).
Pay attention to the level during measuring operations to
ensure that the calibration has not changed, or disturbed by
changing the level’s adjusting knob or by swiveling the level.
The calibration of the measuring arm is now complete and
measuring operations can begin. Refer 4.3 – 4.6.
