Fig 14
1.
PTZ Setting
Start PTZ:
Check the box to start PTZ and do setting for PTZ protocol, COM, port, Baud Rate and PTZ address
if the device has PTZ function
Otherwise not
PTZ Protocol: Decode protocol for decoder. This software has installed main internet protocols,
such as, PELCO-D
，
PELCO-P
，
SUMSANG etc.
COM port: the port number to connect the decoder set for the selected channel. Default Is COM1.
Baud Rate: the decoder baud rate set for the selected channel; there is 2400/4800/9600/19200 for
selection.
PTZ Address encodes: the value is set in the front-end PTZ decoder.
2. PTZ preplace position setting
Control the PTZ to appointed address through the PTZ button. Input the PTZ number in the text of
“set PTZ preplace position”, and input the description information in the text of “set PTZ preplace
Summary of Contents for Video Surveillance System
Page 44: ...Model Picture GA G31 S3G GA G31M S2L ...
Page 45: ...GA G31MX S2 GA G31 S3L ...
