Safety Warnings & Advice
continued
Safety Warnings & Advice
continued
CE - DECLARATION
OF CONFORMITY
Manufacturer:
Company: UQS Global Ltd.
Address: 2nd floor, BuiIding 9, No.1555 West
Jinshajiang Road, Shanghai, China 201803
Contact: Hunter Zhang (Chief Representative)
EU- Importer:
Company: JML Direct Ltd.
Address: JML House, Regis Road, London
NW5 3EG, UK
Contact: FergaI Furey (Product Development
Manager)
Product:
Product designation: Electric Spray Gun
ModeI: Q1P-WYT10-800
In accordance with guidelines:
2006/42/EC
2006/95/EC
2004/108/EC
2002/95/EC
2002/96/EC
The manufacturer hereby declares that the
above mentioned product complies with all
fundamental safety and healthy requirements
of the guideline stated above including their
amendments valid at the time of this declaration.
The following harmonised standards have
been complied with:
EN 60745-1:2009+A11:201 0
EN 60745-2-7:201X
EN 50144-1:1998+A1:2002+A2:2003
EN 50144-2-7:2000
EN 55014-1:2006/+A1:2009
EN 55014-2:1997/+A1:2001/+A2:2008
EN 61000-3-2:2006/+A1:2009/+A2:2009
EN 61000-3-3:2008
•
Maintain
your Paint Sprayer, check
for misalignment or binding of moving
parts, breakage of parts and any
other conditions that may affect the
operation. If damaged in anyway,
contact:
JML customer service on
freephone - 0800 781 7831.
•
USE
the Paint Sprayer Elite,
accessories and application tools in
accordance with these instructions,
taking into account the working
conditions and the work to be carried
out.
•
ONLY
use nozzles / nozzle inserts
provided by the manufacturer.
NEVER
spray without the nozzle
protection in place.
•
ALWAYS
exercise caution when
cleaning or adjusting the nozzle, if
the nozzle becomes clogged during
spraying, please refer to the cleaning
instructions supplied with this
instructional guide.
•
DO NOT
overreach, keep proper
footing and balance at all times.
•
BEWARE
of possible hazards from the
spray material. Observe the information
on any drums, tanks or tins as well as
the manufacturer’s information about
the spray material.
Manufacturer’s instructions are to
be observed in order to reduce the
risk to the user.
•
DO NOT
spray any materials where the
hazard is not known.
•
PREVENT
unintentional operation;
ensure the power switch is in the off
position before connecting to the
power supply, picking up or carrying
the Paint Sprayer Elite.
•
DO NOT SPRAY
outdoors on windy or
rainy days.
•
Household use only.
•
Intended for indoor/outdoor
use ONLY with materials with a
flashpoint above 70°F (21°C)
.
HAZARD: GENERAL
PREVENTION
•
ALWAYS
stay alert and be aware.
Watch what you are doing and use
common sense when handling and/or
operating the Paint Sprayer.
•
USE SAFETY EQUIPMENT
- Always
use eye protection and a respirator
or protective mask when spraying or
handling chemicals. Safety equipment
such as non-slip shoes, hard hats,
safety gloves, steel toe cap boots and
hearing protection when used in the
appropriate conditions will reduce the
risk of personal injury.
•
NEVER
point, aim and/or trigger
the spray jet against yourself, other
persons or animals. Keep your hands
and fingers away from the spray jet. If
the spray jet should penetrate the skin,
seek medical advice immediately from
a qualified doctor or nurse.
•
DO NOT TREAT
skin penetration as a
simple cut. High pressure spray is able
to inject toxins into the body and cause
serious bodily injury. In the event that
injection occurs, seek medical advice
immediately from a qualified doctor or
nurse.
•
DO NOT USE
the Paint Sprayer if
you are tired, or under the influence of
drugs, alcohol or medication.
•
ALWAYS
keep the Paint Sprayer Elite
OUT OF THE REACH OF CHILDREN
and
DO NOT
allow persons unfamiliar
with Paint Sprayer Elite or these
instructions to operate the appliance.
•
DRESS PROPERLY
- Loose fitting
clothing and jewellery can increase the
risk of injury.
5
6
LpA - Sound Pressure
87 dB(A)
KpA - Sound Pressure
Uncertainty
3 dB(A)
LwA - Acoustic Power
98 dB(A)
LwA - Acoustic Power
Uncertainty
3 dB(A)
Hand-arm Vibration
ah10.67 m/s
2
Hand-arm Vibration
Uncertainty
1.5 m/s
2
WARNING -
The vibration emission during
actual use of the Paint Sprayer can differ
from the declared total value depending
on the way the tool is used. Identify safety
measures to protect the operator based on
estimated exposure in use.
Noise and Vibration Information
Measured values determined according to
EN 60745
PSE_Instruction Manual_A.indd 6-7
24/10/2011 13:33
