8
Using Your GoChef
™
Soup Maker & Blender
Using the boil function
1.
Fill the Jug with enough water so that is filled
above the Water Min Line and below the
Boil Max Line.
2.
Add your ingredients to the Jug. Place on
the Lid with the Measuring Cup in place.
3.
Turn on the Soup Maker & Blender and
press the Boil/Steamer button.
4.
The cycle should take approximately 15
minutes. You can stop the cycle at any
time by pressing the On/Off button.
5.
When the cycle is over, the Soup Maker
& Blender will emit a beeping sound. Be
careful when removing the Lid to retrieve
your food as it may be very hot. Hot
steam may also emit from the spout.
How to grind
1.
Add the Filter to the Jug.
2.
Place a small amount of your ingredients
inside the Filter. Place on the Lid with the
Measuring Cup in place.
3.
Press Pulse a few times to break your
ingredients down.
4.
Select Blend. When your ingredients are
ground to the size you require, press the
On/Off button.
How to make drinks
1.
Place the Filter in the Jug, Soya/Juice End
down.
2.
Add any solid ingredients (such as coffee,
fruits, etc.) to the inside of the Filter.
3.
Pour your liquids into the Jug. Place on the
Lid with the Measuring Cup in place.
4.
Turn on. If making hot drinks, press the Boil/
Steam button. To make cold juices, press
the Blend button. You can stop either cycle
at any time by pressing the On/Off button.
5.
The Soup Maker & Blender will emit a
beeping sound once the program has
finished. To improve consistency, particularly
for juices, you may wish to remove the
Filter and use Pulse a few times to blend
your ingredients further. Be careful when
removing the Lid and Filter if you have used
the Boil function. Steam may also emit from
the spout.
GCSMB_Instructions.indd 8
10/16/14 1:59 PM
