Installation & Setup Guide
Info:
Install the PV array stand-offs and rails as far apart as possible to locate
Phazr close to the exposed edge of the PV module. This allows access
to the ON/OFF button located on the bottom of each Phazr.
Info:
The included DC jumper wires from the Phazr to the micro-inverter
are three feet (3’) long. Be sure that you do not mount the Phazrs and
micro-inverters or DC power optimizer too far apart.
WARNING:
Ensure the DC jumper wires from the Phazr to the micro-inverter
or DC power optimizer are plugged into the correct terminals on Phazr
or damage to Phazr
will occur and void the warranty.
Take note of
the DC Input and DC output terminal locations on Phazr.
1.0
Phazr Installation
DC Out
DC In
PV Rail
DC Out
DC In
PV Rail
2
