3.0
Phazr Hub and AmpliFi HD Router System Installation
Installation & Setup Guide
Note: Only JLM Energy Devices (Phazrs, Linez, Loadz) should be used
on this router to prevent communication issues to the equipment.
1.
Install router and mesh points according to the AmpliFi instruction manual. Connect
the AmpliFi router into the homeowner’s modem if there is an extra LAN port. If not,
plug the ethernet cable into one of the available LAN ports on their home router.
1
Install Phazr Hub by plugging the provided micro USB cord and
ethernet cable into the Amplifi Router.
Info:
Make sure to position the mesh points to connect
between the solar system where the Phazrs will
be installed, Linez unit at the main panel and the
router location to get the best signal strength.
Info:
Installing one mesh point into the outlet where the
garage door opener is located (ceiling of the
garage) provides a good location for the Linez unit
if the Main Service Panel is close to the garage.
7
