SECTION 3 - MACHINE CONTROLS AND INDICATORS
31215027
3-9
9.
Lights (If Equipped)
This switch operates the accessory lights pack
-
age if the machine is so equipped.
10.
Jib Lift (If Equipped)
Provides the raising and lowering of the jib.
11.
Soft Touch/SkyGuard Override Switch
For machines equipped with SkyGuard:
The SkyGuard override switch enables
functions cut out by the Skyguard sys
-
tem to be operated again, allowing the
operator to resume use of machine
functions.
For machines equipped with both SkyGuard and Soft Touch:
The switch operates like the SkyGuard
override switch as described above.
The switch also enables the functions
cut out by the Soft Touch system to
operate again at creep speed, allowing the operator to move
the platform away from the obstacle that caused the shut
-
down situation.
12.
Jib Rotate (If Equipped)
Provides rotation of the jib and platform.
13.
Soft Touch/SkyGuard Indicator
Indicates the Soft Touch bumper is against an object or the
SkyGuard sensor has been activated. All controls are cut out
until the override button is pushed. For Soft Touch, controls
are then active in the Creep Mode or for SkyGuard, controls
will work normally.
To
order
go
to
Discount-Equipment.com
