SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
31215027
2-7
Pre-Start Inspection
The Pre-Start Inspection should include each of the following:
1. Cleanliness –
Check all surfaces for leakage (oil, fuel, or bat
-
tery fluid) or foreign objects. Report any leakage to the
proper maintenance personnel.
2. Structure
- Inspect the machine structure for dents, dam
-
age, weld or parent metal cracks or other discrepancies.
3. Decals and Placards
– Check all for cleanliness and legibil
-
ity. Make sure none of the decals and placards are missing.
Make sure all illegible decals and placards are cleaned or
replaced.
4. Operation and Safety Manuals
– Make sure a copy of the
Operation and Safety Manual, is enclosed in the weather
resistant storage container.
5. Walk-Around Inspection
– Perform as instructed.
6. Battery –
Charge as required.
7. Fuel
(Combustion Engine Powered Machines)
– Add the
proper fuel as necessary.
8. Hydraulic Oil
– Check the hydraulic oil level. Ensure hydrau
-
lic oil is added as required.
9. Accessories/Attachments
- Refer to the Accessories section
in this manual or the accessory installed upon the machine
for specific inspection, operation, and maintenance instruc
-
tions.
10. Function Check
– Once the Walk-Around Inspection is com
-
plete, perform a functional check of all systems in an area
free of overhead and ground level obstructions. Refer to Sec
-
tion 4 for more specific operating instructions.
11. Platform Gate
–
Keep gate and surrounding area clean and
unobstructed. Verify the gate closes properly and is not bent
or damaged. Keep gate closed at all times except when
entering/exiting the platform and loading/unloading mate
-
rials.
12. Lanyard Attach Points
–
During operation, occupants in the
platform must wear a full body harness with a lanyard
attached to an authorized lanyard anchorage point. Attach
only one (1) lanyard per lanyard anchorage point
IF THE MACHINE DOES NOT OPERATE PROPERLY, TURN OFF THE MACHINE IMMEDI
-
ATELY! REPORT THE PROBLEM TO THE PROPER MAINTENANCE PERSONNEL. DO NOT
OPERATE THE MACHINE UNTIL IT IS DECLARED SAFE FOR OPERATION.
Parent Metal Crack
Weld Crack
To
order
go
to
Discount-Equipment.com
