SECTION 5 - JLG CONTROL SYSTEM
3121788
5-3
Changing the Access Level of the Hand Held
Analyzer:
When the analyzer is first connected, you will be in access
level 2 which enables you to only view most configuration
settings which cannot be changed until you enter a pass-
word to advance to a lower level. This ensures that a set-
ting cannot be accidentally altered. To change the access
level, the correct password must be entered. To enter the
password, scroll to the
ACCESS LEVEL
menu.
For example:
MENU:
ACCESS LEVEL 2
Press
ENTER
to select the
ACCESS LEVEL
menu.
Using the
UP
or
DOWN
arrow keys, enter the first digit of
the password, 3.
Then using the
RIGHT
arrow key, position the cursor to
the right one space to enter the second digit of the pass-
word.
Use the
UP
or
DOWN
arrow key to enter the second digit
of the password which is 3.
Repeat this process until you have entered all five digits of
the password which is
33271
.
Once the correct password is displayed, press
ENTER
. The
access level should display the following, if the password
was entered correctly:
MENU:
ACCESS LEVEL 1
Repeat the above steps if the correct access level is not
displayed or you can not adjust the personality settings:
ESC
ENTER
MENU:
ACCESS LEVEL 2
ESC
ENTER
MENU:
ACCESS LEVEL 1
Go to
Discount-Equipment.com
to
order your
parts
