JLG 1030P, Operation And Safety Manual

Page: 35 / 56

SECTION 3 - MACHINE OPERATION
3121789
3-7
Platform Control Panel
1. Overload Alarm -
The alarm will sound if platform overload
is detected.
2. Overload Indicator - The indicator will flash if platform
overload is detected.
3. Hourmeter -
Displays the number of hours the machine has
been operated.
4. Enable Switch - Press and hold the enable switch in con -
junction with Lift Up or Lift down switches to enable those
functions.
NOTE: To operate any function, the enable switch must be pressed and
the function selected within five seconds. If a function is not
selected within five seconds, the enable switch must be pressed
again.
5. Lift Down Switch - Press and hold to lower the platform.
6. Lift Up Switch - Press and hold to raise the platform.
7. Emergency Stop Switch - In case of uncontrolled platform
elevation or descent, press the switch to stop platform
movement. Twist clockwise to reset.
CRUSHING HAZARD - BE AWARE OF DESCENDING PLATFORM WHEN LOWERING THE PLAT -
FORM. KEEP HANDS OR FEET OFF THE ARM ASSEMBLY AND FROM UNDER THE PLATFORM.
1. Horn/Alarm
2.
Overload Indicator
3. Hourmeter
4. Enable Switch
5.
Lift Down Switch
6. Lift Up Switch
7.
Emergency Stop Switch
1
2
3
4
5
6
7
OAR00670