JLG 1030P, Operation And Safety Manual

Page: 12 / 56

SECTION 1 - SAFETY PRECAUTIONS
1-4
3121789
• Keep both feet firmly positioned on the platform floor at all times.
Never position ladders, boxes, steps, planks, or similar items on
unit to provide additional reach for any purpose.
•
Never use the arm assembly to gain access to or leave the plat -
form.
•
Keep oil, mud, and slippery substances cleaned from footwear and
the platform floor.
Electrocution Hazard
•
This machine is not insulated and does not provide protection
from contact or proximity to electrical current.
• Maintain distance from electrical lines, apparatus, or any ener -
gized (exposed or insulated) parts according to the Minimum
Approach Distance (MAD) as shown in Table 1-1.
• Allow for machine movement and electrical line swaying.
• Maintain a clearance of at least 10 ft (3 m) between any part of the
machine and its occupants, their tools, and their equipment from
any electrical line or apparatus carrying up to 50,000 volts. One
foot additional clearance is required for every additional 30,000
volts or less.