45
Power
The ES-SloMo requires a 9-12 volt DC power supply capable of
delivering 500 milliamps or more. This can be either from the
power mains using the provided power supply or directly from 9-
12 volts DC. The connector is a 2.1mm coaxial power connector.
The center pin is positive. A power switch on the rear panel turns
the unit on or off.
The unit comes with a power supply appropriate for the country in
which the unit was sold. If you need a power supply specific to
your location, please contact your local distributor or JLCooper
Electronics.
Warning: Using a power supply other than the unit specified could
result in damage to the ES-SloMo and/or other equipment, which is not
covered by the JLCooper Factory Warranty.
Location JLC
P/N
North America
PSDC117
Europe (except UK)
PSDC230
Japan PSDC117
JLCooper Approved Power
Supplies