44
Pinout
ES-SloMo to Deck
The table below details the pinout of the cable included with the
ES-SloMo.
ES-SloMo
Function
Machine
1
Machine
2
Machine
3
Machine
4
Ports
1,2,3,4
Ground 21 11 16 6 1
Receive
A
22 25 17 20 2
Transmit B
10
12
5
7
3
Receive
B
9 13 4 8 7
Transmit
A
23 24 18 19 8
Note: Some decks do not use pin 1 for ground so you may have to
connect pin 1 at each end of the ES-SloMo cable to pins 4 and 6 on
your deck.
The data transmission from the ES-SloMo follows the standard P2
specification. EIA RS-422A at 38400 bits/sec, 8 data bits, 1 stop
bit and odd parity.
ES-SloMo to ES-SloMo / ES-SloMo to Computer
To connect two ES-SloMos together, an RS-422A crossover
adapter or cable will be needed. An adapter is available from
JLCooper Electronics by ordering p/n 620026. An RS-422A
crossover cable can be made by using the following pinout:
1,4,6&9 1,4,6&9
2 8
3 7
7 3
8 2
Note: pins 1, 4, 6 and 9 are grounds and are connected together at
each end.
