Continued on Next Page
SB-F-SUPRCNSL2/8W7_INSTR_SKU#011249
SB-F-SUPRCNSL2/8W7_INSTR_SKU#011249
S T E P 2 9
Using two of the factory bolts that were removed in
STEP 1
, secure both L-brackets to the rear mounting bar.
Leave these bolts loose.
S T E P 2 8
Run speaker wire from the amplifier’s location to the
Stealthbox® and check for proper operation of the woofer.
S T E P 2 7
Place the Stealthbox® / storage console into the truck.
S T E P 2 6
Slide the mounting plate under the rear mount bar.
The front holes need to line up to the factory thread holes,
behind the silver box. Use the factory bolt that was removed
in
STEP 24
to secure the front left side of the plate. Use
supplied hardware to secure the front right side of the plate.
Use the supplied hardware to secure the rear of the plate to
the rear mounting bar.
Page 5 • JL Audio, Inc 2007
S T E P 3 1
Fully tighten the two factory bolts that secure both
L-brackets to the rear mounting bar, from
STEP 29
.
S T E P 3 3
Place the left side panel of the console that was removed in
STEP 5
between the Stealthbox®/storage console and the
left seat.
Place a supplied foam panel between the side panel and the
Stealthbox®/storage console.
Mount the left side panel onto the Stealthbox®/storage
console.
S T E P 3 2
Place the right side panel of the console that was removed
in
STEP 5
between the Stealthbox®/storage console and the
right seat.
Place a supplied foam panel between the side panel and the
Stealthbox®/storage console.
Mount the right side panel onto the Stealthbox®/storage
console.
S T E P 3 0
Lift the front of the Stealthbox® up, place the supplied bolt
from under the A-bracket into the threaded insert of the
Stealthbox®. Tighten the bolt to the Stealthbox®.
Fully tighten the two factory bolts that secure A-bracket to
the mounting bar, from
STEP 23
.
