4-3
No Diving or Jumping. Observe all Safety Rules
GENERAL INSTRUCTIONS - BRACELESS OVAL POOLS
ASSEMBLING THE POOL FRAME
Section
4
B. INSTALLATION OF THE STABILIZERS AND TOP PLATES - Straight Section
1. Install stabilizers and top plates
- Straight Section STEEL Only
a. Install the stabilizers on the wall while ensuring to
leave a gap between each end.
IMPORTANT:
If you have STEEL, insert a Junction rail
into either side of the stabilizer in the straight
section only, before inserting into either side of the
top plate.
(Images 7 to 9)
For the Round section you DO NOT need to insert a
Junction Rail.
b. Make sure the recessed portion of the top plates lie
to the inside of the uprights.
(Image 10)
c. Attach the upright to the top plate using screws.
Repeat until you have installed all the stabilizers
and top plates in the straight section.
Important Note:
Ensure to leave a gap between the two stabilizers.
See Diagram:
Please refer to your pool’s footprint (Section 1, last pages)
for gap measurement.
7
8
9
10
