No Diving or Jumping. Observe all Safety Rules
2-4
GENERAL INSTRUCTIONS - BRACELESS OVAL POOLS
ASSEMBLING THE POOL BASE
Section
2
1. Bottom plates - STRAIGHT SECTION - RESIN
NOTE: Depending on your pool model you may have
steel or resin bottom plates.
a. To install the bottom plate in the straight section,
you need to remove the centralplate of the bottom
plate with a hammer or pliers.
(Images 6 & 7)
b. Insert the end of each bottom rail into the bottom
plate. Leave a gap between the ends of the bottom
rails.
c. Insert the assembled bottom plate with bottom rail
into the vertical sleeves. It is preferable to be two
persons to accomplish this step.
(Images 8 & 9)
A. CONT. INSTALLATION OF BOTTOM PLATES AND BOTTOM RAILS
See Diagrams:
Please refer to your pool’s footprint for gap measurement,
6
7
8
9
Important Note:
PLEASE SEE NOTE ON THE PREVIOUS PAGE 2-2 IN REGARDS TO
THE DIFFERENT LENGTHS OF BOTTOM RAILS.
