PAGE 13 of 53
CE0120 Rev 05
4.10. Chain Connection
To connect chain components, see these following steps:
1.
Pull the pins out from the wheels, twist a quarter turn latching the pins in a
retracted state
(Fig. 47)
.
2.
Align the pins with the mounting holes of the component to be connected
(Fig. 48)
.
3.
Twist the pins until they unlatch and extend into the hole of the connected
component
(Fig. 49)
.
4.11. Ratchet Lever
The rachet levers are used for various locking and braking functions on the
ROTIX
system. Occasionally, movement of the lever locking position is required. The lever
placement can be adjusted by following these steps:
1.
Pull the ratchet lever away from the base of which it is connected
(Fig. 50).
2.
Continue to pull while rotating the lever in the appropriate direction
(Fig. 51)
.
3.
Release the lever and utilize the new tightening position.
Fig. 47
- Pull out and twist pins
Fig. 48
- Align mounting holes
Fig. 49
- Release pins
Fig. 50
- Pull ratchet handle
Fig. 51
- Rotate handle
Fig. 52
- Tighten handle
