26
The second step is to use the cursor keys to select the[ instruction handshake] field.
The third step is to use function keys.
Function key
Function
Close
Do not use Command handshake.If there is no special requirement,
please set the command handshake closed
Open
6.1.7 communication
【
Result Send out
】
mode
Communication instruction:SYSTem:SENDmode {FETCH,AUTO}
The instrument supports the function of sending data automatically to the host computer.
After each test is completed, the data will be sent to the host automatically without the
need for the host to send FETCH? Instructions.
The test results and comparator results are sent to the host after each test is
completed. The format is as follows:
+3.549568e
‐
01,+3.00,RV GD
+3.549911e
‐
01,+3.00,RV GD
+1.20,+1.20,RV NG
......
The format is: resistance value, voltage value, comparison result.
Among them :+1.20
Representing data opening or overflow
Set the steps of [result sending]:
The first step is to enter the < system configuration > page.
The second step is to use the cursor key to select [result delivery] fields.
The third step is to use function key selection.
Function key
Function
FETCH
Using instruction FETCH? Get all measurements
Auto
After each test is completed, it is automatically sent to the host.
6.2 < system information > page
Press [Meas] or [Setup] to go to the main page, press the [System] button in the bottom
taskbar,enter into < System Configuration > page, and press the function key to select
[System Information].
The system information page has no user configurable options.
Fig 6
‐
2 < system information > page
