Rev. C
2
1. General Information
1.1 Overview
Thanks for choosing
Jinko Solar PV modules. In order to ensure the PV modules to
be installed correctly, please read the following operation instructions carefully before
installing and using the modules.
Please remember that the products would generate electricity and certain safety
measures need to be taken to avoid danger.
1.2 Applicable Products
This document is applicable to the series of solar module as listed below:
JKMxxxM-72(xxx=160-200, in increment of 5)
JKMxxxM-60(xxx=200-250, in increment of 5)
JKMxxxP-60(xxx=200-250, in increment of 5)
JKMxxxM-72(xxx=250-315, in increment of 5)
JKMxxxP-72(xxx=250-315, in increment of 5)
Make sure the array of modules installed with the Maximum permitted system voltage
and the rating current and voltage of the sub-equipments such as regulators and
inverters. The maximum permitted system voltage (DC) of the modules sold in
America and Canada is 600V.
This module has a Class C Fire Rating and must be installed over a roof which is with
appropriate fire resistance. Before mounting the module, please consult your local
building department to determine approved roofing materials.
The modules are qualified for application class A, and modules qualified for safety
through UL61730 within this application class are considered to meet the
requirements of Safety Class II
1.3
PV modules generate DC electrical energy when exposed to sunlight or other
light sources. Active parts of module such as terminals can result in burns, sparks,
and lethal shock
photovoltaikforum.com