background image

 

Important Safety Instructions 

 

Read all instructions before using this appliance. 
DANGER – To reduce the risk of electric shock: 
1) Always unplug this appliance from the electrical outlet immediately after using and before cleaning. 
WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons: 
1) An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and before 
putting on or taking off parts. 
2) Do not operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to 
persons. 
3) Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabled persons. 
4) Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended 
by the manufacturer. 
5) Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped 
or damaged, or dropped into water. Return the appliance to a service center for examination and repair. 
6) Do not carry this appliance by supply cord or use cord as a handle. 
7) Keep the cord away from heated surfaces. 
8) Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, and the like. 
9) Never drop or insert any object into any opening. 
10) Do not use outdoors. 
11) Do not operate where aerosol (spray) products are being used or where oxygen is being administered. 
12) To disconnect, turn all controls to the off position, then remove plug from outlet. 
13) Connect this appliance to a properly grounded outlet only. See Grounding Instructions. 
14) This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack 
of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance 
by a person responsible for their safety. Keep children under the age of 13 away from this machine. 

 

 

Summary of Contents for TY-DJS003


















Reviews: