19
INSPECTION OF THE IGNITION UNIT AND
THE LIGHTS
●
Start the engine, turn on the headlamp switch, and
check if the headlight and the rear light are on.
●
Operate the front and rear brake separately,
and check if the brake light is on.
●
Operate turning signal lamp switch, and check
if the turn signal lights work
normally
.
INSPECTING THE REAR MIRROR
●
Check if the back and side objects can be seen
clearly from the rear mirror at the driver’s position.
●
Check if the rear mirror has dirt and damage.
INSPECTING THE REFLECTORS AND
THE LICENSE PLATE
●
Check if the license plate and the reflectors have
dirt and damage.
●
Check if the license plate is fixed enough and if
the serial number is clear
THROTTLE GRIP
●
Rotate the acceleration grip and check its
operation and free play.
●
Make sure that it can return to the original
position by a spring force.
●
Have it
adjusted
by the distributor if necessary.
AIR FILTER
●
The air filter prevents dust from getting into the
engine and damaging the engine.
●
If the air filter is not properly maintained, dust
may get into the engine.
●
The element of air filter should be replaced
regularly. Refer to the list of regular inspection for details.
NOTE:
If your motorcycle is used in dusty,
muddy or wet conditions, check the air filter
element before every driving and replace it
if necessary.
HORN
Make sure the volume is good, not over higher,
not over lower, not shivery or hoarse. If the tone is not
good, adjust the volume by adjusting the volume screw
and adjust the tone by adjusting the bolt.
Summary of Contents for QM50QT-6
