Jinan QingQi QM50QT-6, Manual

Page: 30 / 57

30
GEAR OIL
Replace the gear oil in initial 500Km or every
6000Km. The oil is replaced when the engine is hot in
order to excrete oil drastically.
Step of replacement:
1.Stop the motorcycle on a flat ground. Place an oil
pan under the oil drain screw.
①
Oil drain plug
②
Oil filling plug
2.Use spanner to release the bolt to release the old
gear oil.
3.After tightening the bolt, use a spanner to
dismantle the oil filling plug and prepare to fill the new
gear oil.
4.Place the motorcycle flatly and the left side of it is
up. Fill the oil slowly until it is on the bottom of round
hole. The full capacity is 110cc, then tighten the screw.
CAUTION:
When refilling or emptying gear oil, prevent
any foreign matter from entering into the gear box
and do not allow gear oil to contact the tires. Gear
oil should be changed according to the specified
internal
BATTERY