Jinan QingQi QM50QT-6, Manual

Page: 32 / 57

32
2.6 Make the six plugs of the cover aim at six battery
sprues. After making sure that every plugs end pierce into
battery sprues, depress the electrolyte container until the
cover and the battery top are in one level.
●
This battery does not need vindicate, so
avoid adding water or electrolyte.
●
Do not remove the cover.
●
The capacity of the battery would lower
for not sue for a long time. After removing
the battery from the motorcycle and
recharging it, lay it in a cool ventilated
place.
●
Remove the negative terminal when no
use for a long time.
SPARK PLUG
0.6-0.8mm
Use a small metal brush or cleaner to remove the
carbon deposits at the first 1000km or every 3000km
lately. Readjust the spark plug gap with a spark plug gap
thickness gauge to keep it 0.6~0.8mm. After every
6000km, the spark plug should be replaced. Whenever
remove the carbon deposits, be sure to observe the
operational color of the spark plug’s porcelain tip. The
color tells you whether or not the standard spark plug is
suitable for your type of usage. If the standard spark plug
is very black, you’d better use a high voltage heat one. A
normal operating spark plug should be light brown or tan
in color. If the color is white or almost gleamy, it is used
in over heating condition and change it with a cold type.
If not suitable, replace it with one of the followings:
A7RTC
CAUTION
●
Don’t tighten the spark strongly or make
screw thread interlock. In order not to damage
the cylinder head, do not allow the
contamination to enter the engine through
spark plug hole.
●
The standard spark plug for this scooter