Changchun Jida Scola Co.,Ltd Boyi III Electronic Whiteboard Instraction Manual
- 11 -
Electronic pens
Penpoint
The penpoint will emit ultrasonic wave and infrared signal when pressed down, which is equal to the left
button of a mouse is clicked.
Ultrasonic wave emitter
Do not cover the area with fingers, or the electronic whiteboard cannot accurately detect the position of
the electronic pen.
Pen key 1
Serving as left mouse button
Pen key 2
Serving as right mouse button
Battery cover
●
Caution
●
Try to write on the screen board with vertically-held electronic pen.
●
Holding the electronic pen in other angles may cause error in working.
●
Do not use several electronic pens simultaneously, so as to avoid faulty operation.
●
Notes
●
The penpoint can be replaced by pinching it and pulling out forcefully.
●
The electronic pen has the function of preventing mistaken trigger; when the penpoint or two pen keys
are pressed down to make the electronic pen work for 2.5 minutes constantly, the electronic pen will
automatically stop working.
●
When operating the electronic pen, you will hear buzzer, which means the electronic pen is emitting
ultrasonic wave to detect the position. The buzzer will not adversely affect the surrounding people or
equipment and also will not cause electronic shock.
Battery Replacement
1. Take down (put back) the battery cover. When putting back the cover, please follow reverse steps.
2. Insert (replace) the battery and then put back the cover. Please use AA alkaline battery (#5) and make
Battery Cover
Penpoint
Wave emitter
1 Pen Key
2 Pen Key
