Changchun Jida Scola Co.,Ltd Boyi III Electronic Whiteboard Instraction Manual
- 10 -
Metal fixed Plate
While install Boyi III on the non metal plate, please use our metal fixed plate. At the back of the
metal fixed plate, there is a sticker, please remove the protective film, and stick the metal fixed plate on
the surface you required, a magnetic is used to connect the receiver and the metal fixed plate.
Please refer below images
：
1.
Tear the self-adhesive protective film at the back of the metal fixed plate.
2.
Stick vertically the metal fixed plate to the middle of the left projected area.
3.
Attach the magnet on the metal fixed plate, please note that the positioning holes at the bottom of
the receiver, should be installed accordingly with the positioning column of the metal fixed plate.
4.
Please check and confirm the installation of Boyi III is firm.
