JHCTech KMDA-3602, User Manual

Page: 26 / 60

User’s Manual
19
Table 2.10: COM1/2 Serial Ports Pin Assignments
Pin RS-232 Signal RS-422 Signal RS-485 Signal
1 DCD TX- DATA-
2 RxD TX+ DATA+
3 TxD RX+ NC
4 DTR RX- NC
5 GND GND GND
6 DSR NC NC
7 RTS NC NC
8 CTS NC NC
9 RI NC NC
2.4.9 Remote Switch signal Connector
For the remote switch signal interface of the switch machine, the terminal of the motherboard coastline is
a 2-pin terminal. Table 2.11 for pin assignments.
Figure 2.18 Remote SW Connector
Table 2.11: Remote Switch Pin Assignments
Pin Signal
1 PWR_BTN
2 GND
2.4.10 AT/ATX SW
The KMDA-3602 provides a AT/ATX SW, which users can set Power-on mode by it. When you dial it at
AT, it means power on by AC Power; When you dial it at ATX, it means power on by Power button.
2.4.11 LED
There are 1*Power LED, 1*HDD LED, 3*CPU temperature class LEDS on the front. Users can monitor
the working state of the CPU according to the display of LEDs.