47
SOUND
To access the sound settings, press this button:
Smart Bass:
control low frequencies
Balance:
balancing audio channels
Delay:
Inserting audio delays
Equalizer:
sound equalizer with 30 frequency bands
Loudness:
Measured control emphasize loud high and
low tones.
Filter:
insertion and regulation of low size and high
size frequency filters.
Smart Bass:
controlled emphasis on low frequencies
(subwoofer effect). To enable the function, press the
button to position
I
.
The
Gain
slide adjusts the level of low-tos amplifica-
tion for this section.
The
SUB OUT
slide determines the level of the SUB
output..
The
SUB AFR
slide adjusts the sub output frequency
cut.
to return to the default setup press
Balance:
balancing audio channels
in this section we can adjust the volume of each indi-
vidual speaker simply by moving the cursor initially
placed in the center, or by pressing the freccand on
the four sides.
to return to the default setup press
Ex Amp:
"external amplifier" if activated the pin 13 of
the radio "AMP CON" can drive the ignition of an ex-
ternal amplifier.
Delay:
Inserting audio delays
this feature serves to optimize the listening point by
compensating for the natural delay of sound
with delays on the output audio channels. to listen
without delaying select consistent listening to select a
pre-set choice select one of the following boxes
to manually set select
Equalizer:
equalizer with 30 frequency bands
to get the desired frequency adjustment just raise or
lower the slide
to display frequencies outside the panel, use buttons
with arrows
Pressing
Flat
puts all slides at 0,
Pop
,
Rock
,
Jazz
and
Classic are default settings while User is the last set-
ting made by the user.