10
Putting the device into service
3. PUTTING
THE
DEVICE
INTO
SERVICE
3.1 Setting
up
the
device
• Ensure that the device is put into service by following the instructions
below.
• Place the device a minimum distance of 5 cm from the wall.
• Place the device on a level, dust-free surface, such as a bedside table or
on the floor next to the bed.
• Do not place the device on a soft surface, such as a bed or a couch.
• Place the device in such a way that the mains plug can be unplugged at
any time without problems.
• Pay attention that the therapy tube cannot strangulate the patient.
3.2 Connecting
the
device
The device can be used with or without respiratory humidifier. (The respiratory
humidifier is not yet available at the moment.)
Without
respiratory
humidifier
1.
The openings to the air outlet and the connection socket for the respira-
tory humidifier can be found underneath the device. Check that the open-
ings are sealed with the silicone covers provided.
Warning
Take care when setting up the device that the air
inlet on the back of the device is not blocked by cur-
tains, bedding etc.
