32
appear based on your selection. VGA modes will be supported only on primary
display.
The optional settings are: [VBIOS Default]; [HDMI]; [DP]; [DVI].
*When set as [HDMI], [DP] or [DVI], the following sub-item shall appear:
Secondary IGFX Boot Display
The optional settings are: [Disabled]; ; [HDMI]; [DP]; [DVI].
►
PEG Port Configuration
Press [Enter] to make settings for the following sub-items:
PEG Port Configuration
PEG(PCIE1 Slot)
This will show current device connected to PCIE1 slot.
Max Link Speed
The optional settings are: [Auto]; [Gen1]; [Gen2]; [Gen3].
PEG(PCIE3 Slot)
This will show current device connected to PCIE3 slot.
Max Link Speed
The optional settings are: [Auto]; [Gen1]; [Gen2]; [Gen3].
►
Memory Configuration
Press [Enter] to view brief information for the working memory module.
►
PCH-IO Configuration
Press [Enter] to make settings for the following sub-items:
USB Controller
The optional settings are: [Disabled]; [Enabled].
HD Audio
The optional settings are: [Disabled]; [Enabled]; [Auto].
Onboard Lan1 Controller
Use this item to enable or disable onboard NIC
Wake on LAN
Use this item to enable or disable integrated LAN to wake the system.The
Wake on LAN can not be disabled if ME is on at Sx state.
Onboard LAN2 Controller
Use this item to enable or disable device or controller.
PCIE2 Slot/ PCIE4 Slot/ PCIE5 Slot/ MPE Slot
Use this item to enable or disable the PCI Express root port.
The optional settings are: [Disabled]; [Enabled].
Speed
The optional settings are: [Auto]; [Gen1]; [Gen2]; [Gen3].
System State after Power Failure
Use this item to specify what state to go to when power re-applied after a power
failure(G3 state).
The optional settings are: [Always Off]; [Always On]; [Former State].
