29
Press [Enter] to go to next screen to enable or disable ‘
Intel Ready Mode
Technology’.
Intel Ready Mode Technology
The optional settings: [Disabled]; [Enabled].
*When set as [Enabled], user can also make further settings in the following items
that appear:
Intel RMT State
Use this item to enable or disable Intel RMT enabling status in BIOS.
►
SATA Configuration
Press [Enter] to make settings for the following sub-items:
SATA Controller(s)
The optional settings: [Disabled]; [Enabled].
SATA Mode Selection
The optional settings are: [AHCI]; [RAID].
SATA1/ mSATA
Port
The optional settings: [Disabled]; [Enabled].
Use this item to enable or disable device connected to SATA1 or mSATA.
S ATA2/3/4/5/6
Port
The optional settings: [Disabled]; [Enabled].
Use this item to enable or disable each SATA port.
Hot Plug
The optional settings: [Disabled]; [Enabled].
*Note
：
mSATA does not support Hot Plug function!
►
Network Stack Configuration
Press [Enter] to go to ‘
Network Stack
’ screen to make further settings.
Network Stack
Use this item to enable or disable UEFI Network Stack.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
Ipv4 PXE Support
The optional settings are: [Disabled]; [Enabled].
Use this item to enable Ipv4 PXE Boot Support. When set as [Disabled], Ipv4 boot
option will not be created.
Ipv6 PXE Support
The optional settings are: [Disabled]; [Enabled].
Use this item to enable Ipv6 PXE Boot Support. When set as [Disabled], Ipv6 boot
optional will not be created.
PXE boot wait time
Use this item to set wait time to press [ESC] key to abort the PXE boot.
Media Detect Count
Use this item to set number of times presence of media will be checked.
►
CSM parameters
Press [Enter] to make settings for the following sub-items:
Option ROM execution
Network
