13
2-3 Jumper Settings
Jumper is a small component consisting of jumper clip and jumper pins. Install
jumper clip on 2 jumper pins to close the pins. And remove jumper clip from 2
jumper pins to open the pins. Diagram 2-1 illustrates how to set up a jumper.
Pin (1-2) of JBAT (6-pin): Clear CMOS RAM Settings
Pin(1-2) of JBAT
→
Clear CMOS
1-2 Closed: Clear CMOS(One Touch).
1-2 Open: Normal(Default);
;
Pin1
2
Pin1
2
5
6
5
6
Pin(3-4)of JBAT (6-pin): Flash Descriptor Security Override
Pin1
2
Pin1
2
Pin(3-4) of JBAT
→
Flash Descriptor Security Override
3-4 Open: Enable security measures defined
in the Flash Descriptor (Default);
3-4 Closed: Disable Flash Descriptor
security measures (override).
6
5
5
6
JBAT
JBAT
