33
supply. Use needs to select AT or ATX Mode on MB jumper at first (refer to Pin
(1-2) of jumper
JAT_COPEN
for ATX Mode / AT Mode Select).
Case Open Detect
Use this item to detect Case has already open or not, show message in POST.
The optional settings: [Disabled]; [Enabled].
PS2 KB/MS Connect
Use this item to make PS2 Connect Primary Devices setting.
The optional settings: [Keyboard First]; [Mouse First].
PC Health Status
Press [Enter] to view current hardware health status, set shutdown temperature,
or make further settings in ‘
SmartFAN Configuration
’.
SmartFAN Configuration
Press [Enter] to make settings for SmartFAN Configuration:
SmartFAN Configuration
CPUFAN Smart Mode
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
CPUFAN Full-Speed Temperature
Use this item to set CPUFAN full speed temperature. Fan will run at full speed
when above the preset temperature.
CPUFAN Full-Speed Duty
Use this item to set CPUFAN full speed duty. Fan will run at full speed when above
the pre-set duty.
CPUFAN Idle-Speed Temperature
Use this item to set CPUFAN idle speed temperature. Fan will run at idle speed
when below the pre-set temperature.
CPUFAN Idle-Speed Duty
Use this item to set CPUFAN idle speed duty. Fan will run at idle speed when
below the pre-set duty.
Shutdown Temperature Configuration
Use this item to select system shutdown temperature.
The optional settings: [Disabled]; [70
o
C/156
o
F]; [75
o
C/164
o
F]; [80
o
C/172
o
F];
[85
o
C/180
o
F]; [90
o
C/188
o
F].
Serial Port Console Redirection
COM1
Console Redirection
Use this item to enable or disable COM1 Console Redirection.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], user can make further settings in the ‘
Console
Redirection Settings
’ screen:
Console Redirection Settings
The settings specify how the host computer and the remote computer (which the
user is using) will exchange data. Both computers should have the same or
compatible settings.
Press [Enter] to make settings for the following sub-items.
Terminal Type
