X102 - Setting the IP address of the controller section
The default IP address of the controller section is 192.168.1.1.
If you wish to make changes to the default IP address of the controller
section, proceed as follows:
Step
Action
1
Energize the JC-975MC and wait until the OS has completed
the boot process.
2
Establish an Ethernet connection between programming PC
and JC-975MC via port X102.
3
Launch JetSym or JetIPScan on your PC.
4
Select
JC-975MC
from the controller list.
5
Assign the desired IP parameters to this controller and save
them.
6
If ...
... then ...
... you wish to configure
another controller, ...
... continue with step 4.
... you do not wish to
configure another controller,
...
... reboot all configured
controllers.
Summary of Contents for JC-975MC
Page 3: ...Anschlüsse Bedienelemente ...
Page 17: ...Interfaces Control elements ...
