Connector description - X105/X106
Description xxx
USB port (USB 3.0) for connecting USB devices
(USB 3.0/2.0), such as mouse, keyboard, etc. to
the Windows IPC.
Ports X105/X106 can only be accessed from the
Windows operating system of the IPC.
Connector description - X107/X108
Description
USB port (USB 2.0) for connecting USB flash
drives to the controller, e.g. for the AutoCopy
function.
This port is available only to the control system
(RTOS).
NOTICE
During operation, the assignment of
USB1/USB2 to X107/X108 is not fix. The
jack into which the first USB flash drive is
plugged is automatically designated USB1.
If a second USB flash drive is connected,
USB2 is assigned to the corresponding jack.
If the controller is rebooted with two inserted
USB flash drives, X108 is automatically
designated USB1.
For the AutoCopy function, the USB flash
drive must be connected to USB1. With jack
X108 it is guaranteed in any case that USB1
is assigned to it when the controller is
rebooted with inserted USB sticks.
Therefore, plug the USB flash drive
always into jack X108 for the AutoCopy
function.
Connector X109 - Pinout
Description
Summary of Contents for JC-975MC
Page 3: ...Anschlüsse Bedienelemente ...
Page 17: ...Interfaces Control elements ...
