
keep noticing the caregiver to take appropriate
action via the constant beeps if the patient’s
temperature is out of the temperature alarm
setting. Press any key on the Receiver to stop
the beep alarm.
Remark:
‧
Please keep checking the patient’s temperature when alerting, even some
action to the patient had been done. For not triggering the alarm every
10 minutes, the caregiver can set the Hi/Lo temperature alarm a little bit
higher/lower, and then result the setting after the patient is getting better.
‧
In case that the temperature, when power on, lowers the low temperature
alarm setting then starts the alarm system, this product will trigger the low
temperature alarm system after normal temperature higher than the low
temperature setting by 0.5
℃
.
‧
It may cause low temperature alarm when the armband becomes loose.
Please check immediately the patient and adjust appropriately the arm-
belt.
0