Grey Water Interface Unit 12L
Tel. +47 70 03 91 00
www.jetsgroup.com
Product No. GWT800PL
Doc. Rev.: 2 (2019-06-17)
6
Service and Maintenance
Routine Cleaning
In order to avoid build up of deposits in the pipeline systems and pumping station, the use of Jets™ toilet cleaning products in the toilet and wash/
shower is recommended. Jets™ has a range of suitable cleaning products/domestic cleaners that dissolve and prevent urinary stone and rings in
vacuum tubes and pumps. Frequent use can assist in avoiding periodic concentrated cleaning of the pipes and pumping stations. Jets™ products
can be purchased from your local Jets™ supplier.
Frequency
It is recommended that routine inspection and cleaning (inside and outside of the tank) be carried out a minimum of one time each third year
depending on frequency of use.
Service and Maintenance - Technical Assistance
Jets Vacuum AS provides all customers with 24 hour worldwide technical assistance. For urgent matters please contact Jets Vacuum AS service
department directly at +47 70039100. For other matters, please contact your nearest Jets Vacuum AS supplier.
Service and Maintenance - Disassembly Instructions
1
If connected, disconnect the tank to
allow for disassembly. Empty the
content of the tank prior to
disassembly.
2
Remove the Level Switch
ℷ
.
3
Unscrew the Screw, M5x10
ℴ
and
Nut, M5
ℵ
.
4
Remove the valve from the tank
ℶ
.
5
Unscrew the two screws (Screw,
4x20)
ℳ
from the Bracket.
6
Remove the Bracket
Ⅎ
.
7
Remove the Pipe Bend, ø50mm
90dg
ℰ
.
8
Pull out and remove the Suction
Pipe
ℱ
.
