Jets™ Charm Toilet
Tel. +47 70 03 91 00
www.jetsgroup.com
Product No. TO611PO
Issued 2013-10-28 Rev 3.0
Standard Installation
The toilet is delivered with a fastening kit aimed at installation on existing wall mounted bolts. Note that the fastening kit is not included in the Toilet
Jets™ Charm delivery. The fastening kit may be purchased through your Jets Vacuum AS supplier.
Bolts should be installed on adequately dimensioned weight bearing
studs or a suitable mounting frame. Ensure that mounting bolts are
positioned horizontally 300mm apart.
(A) Water Connection/Vacuum Breaker (Optional)
Maintenance Access and Installation Height
* 300mm Cavity
If maintenance is to occur without removing the bowl from the wall
fixture, a 300mm cavity is required.
If maintenance is to occur by removing the bowl from the wall fixture,
no maintenance cavity is required behind the wall.
** 400mm Toilet Height
Seat height is variable. It is recommended that the top of the toilet
bowl be installed at a height of 400mm from the floor surface for
standard installations.
1
Prepare the Wall Mounting
Prepare the wall mounting as per the instructions above. Note that the
toilet may be mounted on appropriately positioned pre-existing mounting
bolts, bolts installed for the purpose of mounting this toilet or an
appropriately dimensioned mounting frame.
2
Install the valve as per the
products installation instructions
found in the products technical
data. Note: only for deliveries
supplied without a pre-installed
valve.
3
Connect the ball valve from the valve
to the water main.
Note: Do not over tighten.
4
Connect the release button/mechanism hose to the toilet valve.
For connection information see the installation description provided in
the Release Button's technical data sheet.
